AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
Thank you for browsing our collection of automation control and offerings here on Stacked Electromechanicals. You are currently on a page featuring Schneider Electric part number HMISBC, which is listed alongside the description “Rear Module Controller Panel - Dig 8 Inputs/8 Outputs +ana 4 In/2 Out” If this item matches your requirements, we invite you to fill out and submit the RFQ form below with as many details as you can give us. Within 15 minutes of receiving and reviewing your submission, our team will provide a custom quote for part number HMISBC with competitive pricing and shipping times. We are always leveraging our industry relationships and expertise to bring you ideal sourcing solutions.
You can feel confident in the caliber of our selection and beyond, as we only source from entities that we have thoroughly vetted, including Schneider Electric and others. Along with this practice, we uphold a strict NO CHINA SOURCING pledge that guarantees the legitimacy of the products you purchase by shipping them alongside all relevant manufacturer trace documentation and qualifying certifications. Through such practices, we proudly operate with AS9120B, ISO 9001:2015, and FAA AC 00-56B accreditation to bring you the best Rear Module Controller Panel - Dig 8 Inputs/8 Outputs +ana 4 In/2 Out items. Do not hesitate to reach out about our procurement options for the part number HMISBC today and see why customers consistently depend on us for industrial products of need.
Note : We Will Not Share Your Information To Any Third Parties.
| [Us] rated supply voltage | 24 V at 20.4...28.8 V DC |
| 1 serial link, communication ports RS485/RS232, connector type: RJ45, transmission rate: <= 115.2 | Built-in |
| Absolute accuracy error | 1 % of full scale of cyclic ratio 1...99% for fast output (PWM or PTO mode) |
| Accessory Type | Panel |
| Analogue input number | 2 for RTDs |
| Analogue input range | -10...+10 V or 0...10 V - resolution: 12 bits + sign, input impedance: >= 1 MOhm |
| Analogue input type | RTD at - 50...200 °C - resolution: 16 bits temperature probe: Ni 100/Ni 1000 |
| Analogue output number | 0...20 mA/4...20 mA (> 300 Ohm) for open-circuit |
| Analogue output range | -10...10 V/0...10 V (> 2 kOhm) for short-circuit |
| Cable length | 100 m shielded cable for digital input |
| Category | Industrial Automation and Controls, Human Machine Interface (HMI) - Accessories |
| Configurable filtering time | 0.004...0.04 ms bounce filter (latch/event and cumulative filter by step Nx0.5ms (64>=N>=2)) |
| Connection pitch | With |
| Depth | 50.65mm |
| Dimensions | 128 x 102 x 50.65 mm |
| Discrete input current | 5 mA for digital |
| Discrete input number | 6 for digital input conforming to IEC 61131-2 Type 1 |
| Discrete input voltage | 1 for fast input (HSC mode) |
| Discrete output current | 50 mA, response time 2 ms for fast output (PWM or PTO mode) |
| Discrete output number | 6 digital output, output logic: source |
| Discrete output voltage | 24 V DC (voltage limit: 5...30 V) with relay discrete output(s) |
| Downloadable protocols | Modbus TCP/IP |
| Electromagnetic compatibility | Electrostatic discharge immunity test - test level: 6 kV, contact discharge conforming to IEC |
| Enclosure material | 147 m/s² (duration=11 ms) conforming to IEC 60068-2-27 on DIN rail |
| Fixing mode | PC/PBT |
| For Use With/Related Products | Harmony SCU Series |
| Height | 128 mm |
| Immunity to microbreaks | <= 10 ms |
| Input frequency | 100 kHz for fast input - control type single phase |
| Input impedance | 2.81 kOhm |
| Input/Output number | 2 for fast output, terminal(s): FQ0...FQ1 |
| Inrush current | <= 30 A |
| Insulation resistance | > 10 MOhm between power supply and earth |
| Integrated connection type | 1 Ethernet TCP/IP, connector type: RJ45 |
| IP Rating | IP20, IP65 |
| Isolation between channels | 2 fast output (normal mode), output logic: source |
| Isolation between channels and | None |
| Length | 128mm |
| Local signalling | No indicator |
| Manufacturer | Schneider Electric |
| Manufacturer Series | HMIS |
| Maximum Operating Temperature | +50?C |
| Memory description | 128 MB flash memory, type: NAND |
| Mfr | Schneider Electric |
| Minimum Operating Temperature | 0?C |
| Number of common point | 1 for digital input |
| Number of pages | Limited by internal memory capacity |
| Number of Ports | 4 |
| Onboard Memory | 128 MB |
| Operating system | Magelis |
| Output frequency | +/- 0.1 % of full scale of cyclic ratio 1...99% for fast output (PWM or PTO mode) |
| Overvoltage protection | 500 V DC |
| Part Number | HMISBC |
| Port Type | 1 x Serial Link, 2 x USB, Ethernet(RJ45) |
| Power consumption | 15 W |
| Processor frequency | 333 MHz |
| Processor name | CPU RISC |
| Processor Speed | 333MHz |
| Processor Type | CPU RISC |
| Product or component type | Controller |
| Product Range | Magelis SCU |
| Product Status | Active |
| Product weight | 0.359 kg |
| Range of product | Magelis SCU |
| Realtime clock | Modbus |
| Sensor power supply | current (state 0): <= 1.5 mA |
| Shock resistance | 294 m/s² (duration=6 ms) conforming to IEC 60068-2-27 on panel mounting |
| Software designation | SoMachine |
| Specifications | - |
| Supply | External source |
| Supply Voltage | 24 V dc |
| Type | HMIs |
| Vibration resistance | 1 gn (f=9...150 Hz) conforming to IEC 60068-2-6 |
| Warranty | 2 Year |
| Weight | - |
| Width | 102 mm |
| Width | 102mm |
|
|
Guaranteed on-time delivery |
|
|
Over 5100 manufacturers |
|
|
Customized and user-friendly database |
|
|
Competitive Prices |
|
|
Scheduling Flexibility |
|
|
Complete purchasing solutions |
The only independent
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”.
We hope that you will visit us again the next time you need electromechanical parts and make us your strategic purchasing partner.
Request for Quote
